Usage: | Hydrogen, Nitrogen, Oxygen, Argon and Carbon Dioxide |
---|---|
Purpose: | Liquefied Natural Air |
Parts: | Diffusion Tube |
Application Fields: | Electronic |
Noise Level: | Low |
Machine Size: | Large |
Customization: |
---|
Suppliers with verified business licenses
1. Air Compressor
The air compressor adopts screw compressor. The unit to the box type structure, the host for the import, low noise, whole set of unit, lubrication, electricity, cooling, instrument control into an organic whole, realize the mechanical and electrical integration, intelligent controller with PLC control, touch panel provides all the parameter adjustment and monitoring of the key operation parameters, and there are Chinese and English alternative ways of liquid crystal display, automatic protection, automatic alarm, remote control, many sets of linkage and history and so on the function is all ready, realized unattended continuous operation.
2. Pre-cooling System
Adopt fully closed inlet compressor, refrigerant will never leak, efficient steam separator and inlet automatic drainer, ensure no liquid water in the outlet air. With imported refrigeration components, the equipment can run continuously for years and months with long service life. The remote signal interface of air inlet and outlet temperature and the remote start and stop signal as well as the equipment running fault signal are left on the equipment to facilitate the linkage monitoring of users. The machine is a box structure, no foundation installation, convenient construction.
3. Purifier
The purifier adopts a double-adsorption cylinder structure, one runs and the other regenerates to ensure the air in the column is
clean and the whole fractionator runs longer. To prevent the regeneration temperature from being too high, when the nitrogen temperature at the outlet of the heater is higher than 220ºC, the power supply of the heater will be cut off automatically. When the outlet temperature is lower than 180ºC, the power supply will be switched on automatically. B when the temperature of the regenerated nitrogen reaches 100ºC-110ºC, the heating power will be cut off automatically.(temperature can be set according to the situation)
4. Cooling System
The air has to be cooled to sub zero temperatures for liquification & the cryogenic refrigeration & the cooling is provided by highly efficient turbo expander, which cools the air to temperature almost below -165 to-170 deg C
5. Separation Tower
Oil free, moisture free and Carbon Dioxide free air enters into low pressure fin type HEAT EXCHANGER where the air is cooled below sub zero temperatures by air expansion process in the turbo expander. Air gets liquefied when it enters the air separation column & gets separated into oxygen & nitrogen by the process of rectification. Oxygen is available at the outlet of the ASU at a purity of 99.6%. Nitrogen is also available t the outlet as a second product at purity of 99.9% up to 3ppm simultaneously without loss of oxygen product.
6. Oxygen/Nitrogen/Argon Gas Compressor
The final product in the form compressed Oxygen/Nitrogen goes to the high pressure oxygen cylinders at 150 bar or up to higher as required. This can be done by liquid oxygen pump is same models. We can use oil & water free compressor.
7. Gas Filling Cylinder
The air passes through the air filter, enters the air compressor, compresses to 0.7mpa in the compressor, and then enters the purifier after cooling, where the impurities such as water, carbon dioxide and acetylene in the air are removed. The purified air enters the heat exchanger for heat exchange with the backflow polluted nitrogen. A part of the gas is pumped into the turbine expander through the outlet of the heat exchanger, and the expansion provides a cooling source for the whole set of devices. The other gases continue to cool through the second heat exchanger and then enter the rectifying tower, where they are separated by oxygen and nitrogen. Finally, qualified liquid nitrogen is obtained from the top of the rectifying tower. After decompression by the throttle valve, the liquid air at the bottom enters the condensing evaporator at the top of the tower and the nitrogen heat exchange at the top of the rectifying tower, and then passes through the cooler, the second heat exchanger and the main heat exchanger cooling box as the regenerative purifier.
Liquid air separation equipment is an air separation unit that directly produces liquid oxygen, liquid nitrogen and argon. It is usually produced mainly for liquid products, and does not produce or produce gas products in small quantities. The commonly used liquid air separation processes are low pressure circulation process, low pressure circulation process with low temperature freezer, medium pressure circulation process, and medium pressure double expansion process.
The air separation device is a set of deep-freezing method to extract liquid nitrogen from the air. The process adopts the deep freezing circulation principle of the low pressure turbine expander to make the air into a liquid state. Then, according to the boiling point of liquid oxygen and nitrogen, the air is rectified in the fractionator to obtain more than 99.99% liquid nitrogen
Cryogenic equipment flow chart
Characters of cryogenic air separation plant:
Application field | Oil refining Health care Aerospace laboratory diving Food and beverage Medicine and biotechnology electronic Petroleum and natural gas Water and wastewater treatment energy Metal production Welding and metal working chemicals Pulp and paper Automobiles and transportation equipment Glass manufacturing |
Uses of Cryogenic Manufacturing
Liquid oxygen is widely used in hospitals, aerospace, steel smelting and welding industries.Our service for 99.999% purity Cryogenic Air Oxygen Nitrogen Argon Separation Plant for industrial and medical
1. who are we?
We are based in Henan, China, start from 2021,sell to North America(10.00%),South America(10.00%),Eastern Europe(10.00%),Eastern Asia(10.00%),Western Europe(10.00%),Central America(10.00%),Northern Europe(5.00%),Southern Europe(5.00%),Southeast Asia(3.00%).
There are total about 5-10 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Nitrogen Generator,Oxygen generator,PSA generator,PSA oxygen generator,PSA
4. why should you buy from us not from other suppliers?
The company has a professional R&D and technical team.Professional technical support is the driving force for the company's sustainable development.
5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,Western Union;
Suppliers with verified business licenses